Inspection After Installation

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Use the following procedure to check for fuel leaks.

Turn ignition switch "ON" (with engine stopped), and check connections for leakage by applying fuel pressure to fuel piping.
Start engine and rev it up and make sure there are no fuel leaks at the fuel system tube and hose connections.

After removing/installing rear suspension assembly, make sure to adjust wheel alignment and then, adjust neutral position of steering angle sensor. Refer to "WHEEL ALIGNMENT INSPECTION " and "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION ".