LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Coupe >> DTC P2135: TP Sensor >> Diagnostic Trouble Code (DTC) Confirmation Procedure

Diagnostic Trouble Code (DTC) Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION: Before performing the following procedure, confirm that battery voltage is more than 10V at idle. 

WITH CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II. See Figure.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to "Diagnostic Procedure ".

WITH GST 

Follow the procedure "WITH CONSULT-II" above.

scientia non olet · About LEMON Manuals