2. Check PNP Switch Signal

WITH CONSULT-II 

1. Turn ignition switch ON.
2. Select "A/T", then "DATA MONITOR" mode with CONSULT-II.
   Fig 1: CONSULT-II Display Screen

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Select "P/N POSI SW" signal and check its indication under the following conditions.
   Fig 2: PNP Switch Test Conditions

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: GO TO 5 .

NG: GO TO 4.