Multi Remote Ent

Turn ignition switch "OFF".
Connect "CONSULT-II"and "CONSULT-II CONVERTER"to the data link connector.

Fig 1: Locating Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Turn ignition switch "ON".
Touch "START (NISSAN BASED VHCL)".

Fig 2: Displaying CONSULT-II Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "BCM".
If "BCM"is not indicated, go to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT .

Fig 3: Displaying SELECT SYSTEM Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "MULTI REMOTE ENT".

Fig 4: Displaying SELECT TEST ITEM Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Select diagnosis mode.
"WORK SUPPORT", "DATA MONITOR"and "ACTIVE TEST"are available.

Fig 5: Displaying SELECT DIAG MODE Screen
Courtesy of NISSAN MOTOR CO., U.S.A.