LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis >> DTC Test Procedures >> DTC P1815: Manual Mode Switch >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch "OFF" and wait at least 10 seconds before performing the next test.

After the repair, perform the following procedure to confirm the malfunction is eliminated.

  1. Start engine.
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Move selector lever to M position.
  4. Drive vehicle for at least 2 consecutive seconds.
  5. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .