LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Engine Mechanical) >> Engine Assembly >> Removal And Installation - AWD Model >> Removal >> Preparation

Removal And Installation - AWD Model: Removal: Preparation

WARNING: This page is about a different car, the 2004 Infiniti FX35 and 2003 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. Refer to FUEL PRESSURE RELEASE .
  2. Disconnect both battery terminals.
  3. Remove engine cover (Refer to INTAKE MANIFOLD COLLECTOR , battery cover and LH/RH sides front tire.
  4. Remove front and rear engine undercover and front cross bar with power tool.
  5. Drain engine coolant from radiator drain plug. Refer to CHANGING ENGINE COOLANT .
  6. Remove cowl top cover RH. Refer to COWL TOP .
  7. Remove air duct and air cleaner case assembly. Refer to AIR CLEANER AND AIR DUCT .
  8. Remove radiator upper and lower hoses. Refer to RADIATOR .
scientia non olet · About LEMON Manuals