LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX35 AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Intake Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Set the temperature at 18°C (60°F), and then disconnect the battery negative cable.
  2. Use a refrigerant collecting equipment (for HFC-134a) to discharge refrigerant.
  3. Remove the mounting bolt, then remove the low-pressure pipe 2 and high-pressure pipe 3. Refer to REMOVAL AND INSTALLATION OF LOW-PRESSURE PIPE 2 AND HIGH-PRESSURE PIPE 3  .
    CAUTION: Seal connection opening of piping with a cap or vinyl tape to avoid exposure to atmosphere.
  4. Slide the evaporator to passenger side, then remove the intake sensor.
Fig 1: Locating Intake Sensor
G00732101Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals