Intake Sensor

WARNING: This page is about a different car, the 2002 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

The intake sensor is located on the cooling unit. It converts temperature of air after it passes through the evaporator into a resistance value which is then input to the auto amp.

After disconnecting intake sensor harness connector, measure resistance between terminals 1 and 2 at sensor harness side, using the table below.

Fig 1: Locating Intake Sensor

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Intake Sensor Temperature/Resistance Table

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, replace intake sensor.