LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> QX4 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> On-Vehicle Service >> Transfer Motor >> Installation

Transfer Motor: Installation

  1. Apply petroleum jelly or ATF to O-ring.
  2. Align width across flat-notch with oil pump groove, and install transfer motor.
  3. Tighten bolts.

    Tightening Torque: 41 - 48 N.m (4.2 - 4.9 kg.m, 30 - 35 ft.lb) 

  4. Install breather pipe to transfer motor.
  5. Connect transfer motor harness connector.
scientia non olet · About LEMON Manuals