Diagnostic Procedure

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch to "ON" position and start engine.
2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  
  Fig 1: Checking CAN Communication Circuit With CONSULT-II
  Courtesy of NISSAN MOTOR CO., U.S.A.
Is any malfunction of the "CAN COMM CIRCUIT" indicated?
1. Yes >> Print out CONSULT-II screen, GO TO LAN section. Refer to "CAN SYSTEM (FOR VDC MODELS) ", "CAN SYSTEM (FOR ICC MODELS) ".
2. No >> INSPECTION END