Tightening Torque

WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.

Torque Specifications

Cylinder block drain plug (right, left)	14.7 -- 24.5 (1.5 -- 2.5, 11 -- 18)
Radiator mounting bracket	3.8 -- 4.5 (0.39 -- 0.46, 34 -- 39)*
Radiator drain plug	0.78 -- 1.56 (0.08 -- 0.16,7 -- 14)*
Radiator coolant temperature sensor	4.9 -- 9.8 (0.5 -- 1.0, 44 -- 86)*
Cooling fan shroud	3.8 -- 4.5 (0.39 -- 0.46, 34 -- 39)*
Reservoir tank bracket	3.8 -- 4.5 (0.39 -- 0.46, 34 -- 39)*
Fan	7.8 -- 11.8 (0.8 -- 1.2,70 -- 104)*
Cooling fan motor	3.9 -- 4.9 (0.40 -- 0.49, 35 -- 43)*
Cooling fan fluid cooler	3.0 -- 3.9 (0.31 -- 0.39, 27 -- 34)*
Fluid hose	14.7 -- 17.7 (1.5 -- 1.8,11 -- 13)
Reservoir tank	15.7 -- 19.6 (1.6 -- 1.9,12 -- 14)
Water pump pulley	7.2 -- 9.2 (0.73 -- 0.94,64-81)*
Water pump	24.5 -- 31.4 (2.5 -- 3.2,18 -- 23)
Water inlet	16.7 -- 22.6 (1.7 -- 2.3,13 -- 16)
Thermostat housing	16.7 -- 22.6 (1.7 -- 2.3, 13 -- 16)
Rear water outlet	16.7 -- 22.6 (1.7 -- 2.3,13 -- 16)
Water connector	16.7 -- 22.6 (1.7 -- 2.3,13 -- 16)
Water suction pipe	16.7 -- 22.6 (1.7 -- 2.3,13 -- 16)
Heater pipe	5.4 -- 7.3 (0.55 -- 0.75, 48 -- 65)*