LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> Q45 >> Repair and Diagnosis >> Electrical >> Gauges >> Vehicle Information And Integrated Switch System >> Vehicle Information And Integrated Switch System /Without Navigation System >> CONSULT-II Function >> Consult-II Basic Operation Procedure

Consult-II Basic Operation Procedure

  1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, and turn the ignition switch ON.
    Fig 1: Identifying Data Link Connector
    G02039437Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: START (NISSAN BASED VHCL) Display
    G02039438Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "MULTIAV".

    If "MULTIAV" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

  4. Select "VIRSION", "SELF-DIAG RESULTS" or "SIGNAL MONITOR".
    Fig 3: MULTIAV Display
    G02039439Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals