Work Flow
- Check the symptom and customer's requests.
- Understand the system description. Refer to "SYSTEM DESCRIPTION ".
- Carry out the preliminary check. Refer to "PRELIMINARY CHECK ".
- Carry out the communication inspection.
If CONSULT-II is used, refer to "IVMS COMMUNICATION DIAGNOSIS ".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS ".
Is the communication diagnosis result OK?
- If OK, GO TO 7 .
- If NG, GO TO 5.
- Repair or replace depending on the diagnosis result.
- Carry out the communication diagnosis again.
If CONSULT-II is used, refer to "IVMS COMMUNICATION DIAGNOSIS ".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS ".
Is communication diagnosis result OK?
- If OK, GO TO 7.
- If NG, GO TO 5 .
- Perform self-diagnosis.
If CONSULT-II is used, refer to "CONSULT-II BASIC OPERATION PROCEDURE ".
If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER ".
Is self-diagnosis result OK?
- If OK, GO TO 11 .
- If NG, GO TO 8.
- Repair or replace depending on the diagnosis result.
- Carry out the self-diagnosis again.
If CONSULT-II is used, refer to "OPERATION PROCEDURE ".
If CONSULT-II is not used,
Refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER ".
Is self-diagnosis result OK?
- Referring to Trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "SYMPTOM CHART ".
- Does the Reverse Interlock Door Mirror System operate normally?
If it operates normally, GO TO 12.
- If not, GO TO 10 .
- Inspection end