LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> M45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P1701: Transmission Control Module (Power Supply) >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch to "ON" position. (Do not start engine.)
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Wait for at least 2 consecutive seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult II Display (DTC P1701)
    G02021372Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals