LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> M45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P0725: Engine Speed Signal >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch to "ON" position and select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  2. Start engine and maintain the following conditions for at least 10 consecutive seconds.

    VHCL SPEED SE: 10 km/h (6 MPH) or more 

    ACCELE POSI: More than 1/8 

    Selector lever: "D" position 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Engine Speed Signal Consult II Display
    G02021332Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals