Fail-Safe Input Conditions
FAIL-SAFE INPUT CONDITIONS
| Fail-safe input conditions | Release conditions |
|---|---|
| No vehicle speed signal entered for at least 10 seconds while driving at an engine speed of greater than 1,500 rpm. |
|
| A vehicle speed signal of greater than 30 km/h (19 MPH) or abruptly drops below 2 km/h (1 MPH). |
NOTE:
When the engine is revved up to 1,500 RPM or more for at least 10 seconds with vehicle at standstill, the failsafe function operates; however, this is not a matter of concern. The fail-safe function can be released by driving vehicle of a speed of greater than 1.4 km/h (0.9 MPH) or by turning ignition switch from "OFF" to "ON".