LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> I35 >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belts >> Tether Anchor Plate >> Removal And Installation

Removal And Installation

CAUTION: Replace anchor bolts if they are deformed or worn out.
Fig 1: Replacing Anchor Bolts (If They Are Deformed Or Worn Out)
G03356811Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Remove tether anchor plate cover. Refer to SIDE AND FLOOR TRIM in BODY & TRIM -- EXTERIOR & INTERIOR - I35 article for details.
  2. Remove tether anchor plate.
NOTE:
  • To install, reverse the removal procedure sequence.