LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> I35 >> Repair and Diagnosis >> Brakes >> Traction Control >> TCS/VDC >> Removal And Installation >> Sensor Rotor >> Removal

Sensor Rotor: Removal

  1. Remove the drive shaft and rear wheel hub. Refer to AXLE SHAFT and WHEEL HUB .
    Fig 1: Identifying Drive Shaft
    G02091679Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
    Fig 2: Removing Rear Sensor Rotor Using Suitable Drift
    G02091680Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals