Pattern B

With any door (including hood and trunk lid) open if lock/unlock switch is used to lock doors, smart entrance control unit terminal 33 receives a ground signal

from terminal 8 of lock/unlock switch LH, or
from terminal 11 of lock/unlock switch RH
through body grounds M9, M25 and M87, or

With any door (including hood and trunk lid) open if the key is used to lock doors, front power window main switch terminal 6 receives a ground signal

from terminal 3 of the key cylinder switch LH
through body grounds M9, M25 and M87.

If these signals and lock signal from keyfob are received by the smart entrance control unit, ground signals of terminals 1, 2 and 3 are interrupted and all doors are closed, the vehicle security system will activate automatically.

NOTE: Vehicle security system can be set even though the rear door is not locked.

Once the vehicle security system has been activated, smart entrance control unit terminal 38 supplies ground to terminal 2 of the security indicator lamp.

The security indicator lamp will illuminate for approximately 30 seconds and then blinks every 2.6 seconds. Now the vehicle security system is in armed phase.