Removal And Installation: Installation

WARNING: This page is about a different car, the 2004 Infiniti FX45 and 2003 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

Where positioning pin is used, be sure to securely insert it into the hole of mating part.
When installing engine mount brackets (RH and LH) to cylinder block, tighten two upper bolts (shown as "A" in the figure) first.

Fig 1: Identifying Engine Mount Bracket Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.

Then tighten two lower bolts (shown as "B" in the figure).