Pattern B

With any door (including hood and glass hatch) open, if lock/unlock switch is used to lock doors, Smart Entrance Control Unit (SECU) terminal No. 33 receives a LOCK signal from terminal No. 8 of left lock/unlock switch through body grounds M77 (located on rear of right front fender) and M111 (located behind left front kick panel), or from terminal No. 11 of right lock/unlock switch through body grounds M4 (located behind left front kick panel), M66 and M147 (both located behind right front kick panel), or with any door (including hood and glass hatch) open if the key is used to lock doors, SECU terminal No. 33 receives a LOCK signal from power window main front switch terminal No. 8.

When key cylinder switch LOCK signal ground is supplied to power window main switch terminal No. 6 from terminal No. 3 of the left front key cylinder switch through terminal No. 2 of left side front key cylinder switch through body grounds M77 (located on rear of right front fender) and M111 (located behind left front kick panel), or SECU terminal No. 11 receives a ground signal from terminal No. 1 of the back door key cylinder switch through body grounds B11 (located behind left front kick panel), B22 (located behind left rear trim panel) and D210 (located behind rear hatch trim panel).

If these signal and lock signal from keyfob are received by the (SECU), ground signals of terminals No. 1, 2, and 3 are interrupted and all doors are closed, the vehicle security system will activate automatically.

Once the vehicle security system has been activated, (SECU) terminal No. 38 supplies ground to terminal No. 2 of the security indicator lamp. The security lamp will illuminate for approximately 30 seconds and then blinks every 2.6 seconds. Now the vehicle security system is in armed phase.