Door Switch
Ensure ignition is off. Disconnect door switch harness connectors. Using DVOM, check for continuity between door switch terminals under specified conditions. See DOOR SWITCH CONTINUITY SPECIFICATIONS table. If continuity is not as specified, replace faulty door switch. If continuity is as specified, check for open or short in door switch harnesses. Check for poor door switch ground. Repair as necessary.
DOOR SWITCH CONTINUITY SPECIFICATIONS (1)
| Application (Terminals No.) & Condition | Continuity | |||
|---|---|---|---|---|
| Left Front Switch (1 & 2) | ||||
| Door Closed | No | |||
| Door Open | Yes | |||
| Back Door Switch (1 & 2) | ||||
| Door Closed | No | |||
| Door Open | Yes | |||
| Left Rear, Right Front & Right Rear Switches (1 & Ground) | ||||
| Door Closed | No | |||
| Door Open | Yes | |||
|
||||