LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2002 >> QX4 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation >> Navigation System >> Initialization >> How To Perform

How To Perform

  1. Switch the navigation system mode to self-diagnosis by pushing both "MAP" and "D/N" switches at the same time for more than 5 seconds.
    Fig 1: Identifying MAP And D/N Switch
    G02015093Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "Confirmation/ adjustment".
    Fig 2: Identifying Confirmation/ Adjustment Display On Screen
    G02015094Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "Initialize Location". Then the previous screen is displayed.
    Fig 3: Identifying Initialize Location Display On Screen
    G02015095Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Push "Previous" switch.
    Fig 4: Displaying Self Diagnosis Mode On Screen
    G02015096Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Push the "MAP" switch.
  6. Touch "Setting".
    Fig 5: Identifying Unknown Street Name Display On Screen
    G02015097Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Touch "System Setting".
    Fig 6: Identifying System Setting Display On Screen
    G02015098Courtesy of NISSAN MOTOR CO., U.S.A.
  8. Touch "GPS Information".
    Fig 7: Identifying GPS Information Display On Screen
    G02015099Courtesy of NISSAN MOTOR CO., U.S.A.
  9. More than one GPS satellite icon turns green. (It may take 1 to 15 minutes.)
    NOTE: Drive the vehicle for a while* in order to change the receiving condition of the radio wave from the GPS satellite if the GPS icon does not turn green.
    *The driving distance which is necessary depends on the receiving condition of the radio wave from the GPS satellite.
    Fig 8: Displaying GPS Information
    G02015100Courtesy of NISSAN MOTOR CO., U.S.A.
  10. Push "MAP" switch and check the following.
    • Confirm that the GPS icon on the map turns green.
    • Then the position marker should show the current location.
    • Position marker rotates corresponding to the movement of the vehicle.
  11. Initialization is completed.
    Fig 9: Identifying MAP Switch
    G02015101Courtesy of NISSAN MOTOR CO., U.S.A.