Brake Booster: Installation
CAUTION:
- Be careful not to deform or bend brake pipes during installation of booster.
- Replace clevis pin if damaged.
- Refill with new brake fluid "DOT 3".
- Never reuse drained brake fluid.
- Take care not to damage brake booster mounting bolt thread when installing. Due to the narrow angle of installation, the threads can be damaged by the dash panel.
- Before fitting booster, temporarily adjust clevis to dimension shown.
- Fit booster, then secure mounting nuts (brake pedal bracket to brake booster) lightly.
- Connect brake pedal and booster input rod with clevis pin.
- Secure mounting nuts.
- Specification: 13-16 N.m (1.3 - 1.6 kg-m, 9-12 ft-lb)
- Install master cylinder. Refer to "INSTALLATION ".
- Adjust brake pedal height and free play. Refer to "Adjustment" in "BRAKE PEDAL AND BRACKET " .
- Secure lock nut for clevis.
- 16 - 22 N.m (1.6 - 2.2 kg-m, 12 -16 ft-lb)
- Bleed air. Refer to "BLEEDING BRAKE SYSTEM " .