LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2002 >> Q45 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can >> Can System >> Work Flow >> Notes

Work Flow: Notes

  1. Print all the data of "SELF-DIAG RESULTS" and "DATA MONITOR" for "ENGINE", "A/T", and "VDC" displayed on CONSULT-II. Refer to DTC U1000 CAN COMMUNICATION LINE for "ENGINE" and Refer to "DTC U1000 CAN COMMUNICATION LINE " for "A/T". Refer to INSPECTION 1 CAN COMMUNICATION LINE OR VDC/TCS/ABS CONTROL UNIT AND STEERING ANGLE SENSOR SYSTEM for "VDC".
  2. Attach the printed sheet of "SELF-DIAG RESULTS" and "DATA MONITOR" onto the check sheet. Refer to "CHECK SHEET  "
  3. Based on the data monitor results, put "v" marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET  "
    NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.
  4. According to the check sheet results (example), start inspection. Refer to "CHECK SHEET RESULTS (EXAMPLE)  "
scientia non olet · About LEMON Manuals