Sensor Rotor: Installation

Install the sensor rotor. For front sensor rotor, use hammer and wooden block. For rear sensor rotor, use suitable drift and press.

• Always replace sensor rotor with new one.
  Fig 1: Installing Front Sensor Rotor

  Courtesy of NISSAN MOTOR CO., U.S.A.
• Pay attention to the dimension of rear sensor rotor as show in figure.
  1. h: 22.7 - 23.7 mm (0.894 - 0.933 in) 
  Fig 2: Installing Rear Sensor Rotor

  Courtesy of NISSAN MOTOR CO., U.S.A.