System Description

Power is supplied at all times:

• From 30-amp fusible link (letter "D", located in the fuse and fusible link box).
• To circuit breaker terminal No. 1.
• Through circuit breaker terminal No. 2.
• To power window relay terminal No. 3.
• To power window main switch terminal No. 7.

With ignition switch in ON or START position, power is supplied through 10-amp fuse No. 8, located in the fuse block (J/B) to power window relay terminal No. 1.

Ground is supplied to power window relay terminal No. 2 through body grounds M15, M71 and M76. Then power window relay is energized and power is supplied through power window relay terminal No. 5 to power window main switch terminal No. 11 to left and right rear power window sub-switches terminal No. 5.