Power Steering Oil Pump: Disassembly
CAUTION:
- Parts which can be disassembled are strictly limited.
Never disassemble parts other than those specified.
- Disassemble in as clean a place as possible.
- Clean your hands before disassembly.
- Do not use rags; use nylon cloths or paper towels.
- Follow the procedures and cautions in the Service Manual.
- When disassembling and reassembling, do not let foreign matter enter or contact the parts.
- Remove snap ring, then draw drive shaft out.
Be careful not to drop drive shaft.
- Remove oil seal.
Be careful not to damage front housing.
- Remove connector and flow control valve with spring.
Be careful not to drop flow control valve.