Light Warning Chime

Power is supplied at all times

• through 10A fuse [No. [12], located in the fuse block (J/B)]
• to warning chime terminal (1).
• Through 15A fuse [No. [63], located in the fuse, fusible link and relay box]
• to tail lamp relay terminals (1) and (6).

With the ignition switch in the ON or START position, power is supplied

• through 7.5A fuse [No. [32], located in the fuse block (J/B)]
• to BCM terminal (68).

When the lighting switch is in the 1ST or 2ND position, ground is supplied

• to tail lamp relay terminal (2)
• from body grounds (E22) and (E36)
• through lighting switch terminals (11) and (5).

Tail lamp relay is then energized, and power is supplied

• to BCM terminal (3)
• from tail lamp relay terminal (7)
• through 7.5A fuse [No. [22], located in the fuse block (J/B)].

With the lighting switch in the 1ST, 2ND position, the ignition switch in ACC or OFF position, and the driver's door OPEN, the warning chime will sound in the same manner as ignition key warning chime.