System Description: Notes

The warning chime is controlled by the smart entrance control unit.

The warning chime is located in the smart entrance control unit.

Power is supplied at all times

through 10A fuse [No. 13, located in fuse block (J/B)]

to smart entrance control unit terminal 49 and

to key switch terminal 2,

through 10A fuse (No. 60, located in the fuse and fusible link box

to tail lamp relay terminals 1 and 3.

With the ignition switch in the ON or START position, power is supplied

through 10A fuse [No. 10, located in the fuse block (J/B)]

to smart entrance control unit terminal 27.

Ground is supplied to smart entrance control unit terminal 43 and 64 through body grounds M9, M25 and M87. When a signal, or combination of signals, is received by the smart entrance control unit, the warning chime will sound.