Shift Control Components: Inspection
- Check if the width of shift fork hook (sliding area with coupling sleeve) is within allowable specification below.SHIFT FORK HOOK SLIDING WIDTH
Item One-side wear specification Sliding width of new part 1st & 2nd 0.2 mm (0.008 in) 7.80 - 7.93 mm (0.3071 - 0.3122 in) 3rd & 4th 0.2 mm (0.008 in) 7.80 - 7.93 mm (0.3071 - 0.3122 in) 5th & reverse 0.2 mm (0.008 in) 0. mm (0.3071 - 03122 in) - Check if shift check groove of fork rod or 5th & reverse check groove is worn, or has any other abnormalities.