System Description: Notes

The warning chime is controlled by the smart entrance control unit.

The warning chime is located in the smart entrance control unit.

Power is supplied at all times.

• Through 10A fuse [No. 24, located in the fuse block (J/B)]
• To key switch terminal 1.

Power is supplied at all times

• Through 10A fuse [No. 34, located in the fuse block (J/B)]
• To tail lamp relay terminals 1 and 3.

Power is supplied at all times

• Through 30A fusible link (letter d, located in the fuse and fusible link box).
• To smart entrance control unit terminal 11.

With the ignition switch in the ON or START position, power is supplied

• Through 10A fuse [No. 8, located in the fuse block (J/B)]
• To smart entrance control unit terminal 33.

Ground is supplied to smart entrance control unit terminal 16 through body grounds M15, M71 and M76.