Generator & Regulator - Except QX4: Overhaul

NOTE: For overhaul, see exploded views. See Fig 1 or Fig 2 . A ring is used to lock outer bearing race in generator rear cover. It may be necessary to heat bearing housing to remove cover. Use a 200-watt soldering iron to heat housing. DO NOT use heat gun, as it may damage diodes.

Fig 1: Exploded View Of Hitachi Generator (I30 & Q45)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Exploded View Of Hitachi Generator (QX4)

Courtesy of NISSAN MOTOR CO., U.S.A.