LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1997 >> J30 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gearshift Linkage >> QX4

Gearshift Linkage: QX4

  1. Place selector lever in Park. Remove center console. Loosen lock nuts. See Fig 1 . Ensure transmission is in Park position.
  2. While pulling selector lever toward Reverse (without pushing shift lever release button), tighten turn buckle until slight cable tension is achieved. Back off turn buckle one turn. Tighten lock nuts to 36-48 INCH lbs. (4-6 N.m). Ensure shift lever moves smoothly.
Fig 1: Adjusting Shift Linkage (QX4)
G95J60227Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals