LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1996 >> J30 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Actuator Solenoid Valve Relay

Actuator Solenoid Valve Relay

  1. Remove actuator solenoid valve relay (5-terminal relay) from actuator. Continuity should exist between relay terminals No. 30 and 87a. See Fig 1 . Continuity should not exist between terminals No. 30 and 87. If continuity is not as specified, replace relay.
  2. If continuity is as specified, apply battery voltage across relay terminals No. 85 and 86. Continuity should not exist between terminals No. 30 and 87a. Continuity should exist between terminals No. 30 and 87. If continuity is not as specified, replace relay.
Fig 1: Identifying Actuator Solenoid Valve Relay Terminals
G93I83509Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals