Multi-Remote Control Switch Precautions (ITB95-066)
Publication date: 1995-11-15Reference number: ITB95-066
MULTI-REMOTE CONTROL SWITCH PRECAUTIONS
TECHNICAL SERVICE BULLETIN
Reference Number(s): ITB95-066, Date of Issue:
November 15, 1995
MULTI-REMOTE CONTROL SWITCH PRECAUTIONS
Model(s): All 1995-96 Infiniti models with multi-remote control systems
Classification: EL95-007
Section: Electrical System
Bulletin No.: ITB95-066
Date: November 15, 1995
SERVICE INFORMATION
Observe the following precautions in the handling of Infiniti multi-remote switches:
- Use the correct battery for replacement. Te correct aftermarket part number for the battery used in all Infiniti remote switches is CR2025. DO NOT use batteries designated CR2016. These batteries are slightly smaller and will make intermittent contact.
- Use the correct programming procedure when re-programming, replacing, or adding a multi-remote switch. The procedure for the I30 is slightly different from other Infiniti models. Refer to ITB95-051 (EL95-003) for details.
- DO NOT mix multi-remote switches on any individual vehicle. Each new Infiniti vehicle comes with two multi-remote switches, each programmed to that particular vehicle. If you use a multi-remote switch from another vehicle, it will not operate. All of the customer's multi-remote switches, up to four, must be programmed to the vehicle at the same time. This is because the programming procedure erases any previous programs.