LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1994 >> J30 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position (CKP) Sensor >> Removal & Installation

Removal & Installation

  1. Crankshaft Position sensor is located on left front engine on timing cover. Mark CKP sensor position before removing mounting screws. Disconnect harness connector. Remove mounting screws. Remove crank angle sensor.
  2. To install, reverse removal procedure. Ensure marks made during removal procedure are aligned.
scientia non olet · About LEMON Manuals