LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1993 >> J30 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnostic Trouble Code (DTC) Identification >> Component Testing >> Actuator Motor Relay

Actuator Motor Relay

  1. Remove actuator motor relay (4-terminal relay) from actuator. Check for continuity between relay terminals No. 30 and 87. See Fig 1. If continuity exists, replace relay.
  2. If continuity does not exist, apply battery voltage between relay terminals No. 85 and 86. Again check for continuity between relay terminals No. 30 and 87. If continuity is not present, replace relay. If continuity is present, relay is okay.
Fig 1: Identifying Actuator Motor Relay Terminals
G93H83508Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals