LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1991 >> Q45 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Air Cut Valve (With Traction Control System)

Air Cut Valve (With Traction Control System)

  1. Remove air cut valve. Place valve, gasket side up, in approximately 1" (30 mm) of 32°F (0°C) water. DO NOT wet gasket. Blow through air inlet. Air should pass easily.
  2. Heat water to greater than 122°F (50°C). Blow through air inlet. Almost no air should pass. If valve does not function as specified, replace valve.
scientia non olet · About LEMON Manuals