Engine Control Module (ECM): Removal
WARNING: This page is about a different car, the 2024 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the oil pressure characteristics backup procedure using the diagnostic tool when replacing with a new ECM.
(Refer to Engine Control Module (ECM) - "ADJUSTMENT ")
- Disconnect the battery negative (-) terminal.
- Disconnect the ECM Connector (A).
- Remove the ECM bracket (A) after removing the bolts and nut.
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
- Remove the ECM from the bracket after removing the bolts (A).
Tightening Torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)