PCM Neutralization Procedure (When Smart Key Is Applied)
CAUTION:
[When installing a used PCM]
Refer to ETC MODULE LEARNING PROCEDURE
[When installing a new PCM without learning experience]
If IGN is turned ON/OFF using the key or start button, the smart key registration process is automatically performed in the PCM.
- For vehicles equipped with Smart Key, refer to the procedures below:
[When installing a used PCM]
- Inspection for "PCM Initialization" procedure by using diagnostic equipment.
- If you turn on/off IGN using a smart key or the Start button after completion of "PCM Neutralization", the PCM will automatically learn the smart key information.
Refer to ETC MODULE LEARNING PROCEDURE
[When installing a new PCM without learning experience]
If IGN is turned ON/OFF using the key or start button, the smart key registration process is automatically performed in the PCM.