Inspection For APS Unit
- Check the accelerator pedal position sensor unit using a multi-tester.
List of Inspection Normal value Inspection Condition Probe (+) Probe (-) Accelerator pedal position sensor
Unit InspectionApprox. 0.7 ~ 0.8V - IGN Switch "ON"
- Accelerator pedal not depressed (C.T)
Accelerator pedal position sensor connector side
3. APS1 signalChassis Ground Accelerator pedal position sensor
Unit InspectionApprox. 0.33 ~ 0.43V Accelerator pedal position sensor connector side
6. APS2 signalChassis Ground Accelerator pedal position sensor
Unit InspectionApprox. 3.98 ~ 4.22V - IGN Switch "ON"
- Accelerator pedal fully depressed (W.O.T)
Accelerator pedal position sensor connector side
3. APS1 signalChassis Ground Accelerator pedal position sensor
Unit InspectionApprox. 1.93 ~ 2.17V Accelerator pedal position sensor connector side
6. APS2 signalChassis Ground OK
Go to "Inspection For APS1 Power Circuit" procedure.
NG
Go to "APS replacement" procedure.