(Clock Spring Removal And Installation)
WARNING: This page is about a different car, the 2024 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
ABBREVIATED PROCEDURE
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery (-) terminal | - | - | - | - | - |
| 2 | Remove the steering wheel (Refer to Steering System - "STEERING WHEEL ") |
- | - | - | - | - |
| 3 | Remove the steering column shroud upper panel (Refer to Body (Interior/Exterior/Electrical) - "STEERING COLUMN SHROUD PANEL ") |
- | - | - | - | - |
| 4 | Remove the steering column shroud lower panel (Refer to Body (Interior/Exterior/Electrical) - "STEERING COLUMN SHROUD PANEL ") |
- | - | - | - | - |
| 5 | Disconnect the clock spring & multifunction switch assembly connector | - | - | - | - | - |
| 6 | Remove the clock spring & multifunction switch assembly | Bolt | 12.0 (1.2/8.9) | - | - | - |
|
||||||
| Install in the reverse order of removal | - | |||||