Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Disconnect the ECM connector (A).

Fig 1: ECM Components Location
Courtesy of HYUNDAI MOTOR AMERICA
Release the fixing hook (A), and then removing the ECM (B).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the ECM after loosening the mounting bolts (A).
Tightening Torque:

6.9 - 8.8 N.m (0.7 - 0.9 kgf.m, 5.1 - 6.5 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA