LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2024 >> Santa Cruz SE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Assembly) >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Loosen the oil filler plug (A).

    [A Type] 

    G14775061Courtesy of HYUNDAI MOTOR AMERICA

    [B Type] 

    G14775062Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.

    Information 

    • Oil level must be up to fill the hole, if not, add oil until it runs over.
      G14775063Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the oil filler plug with new gasket.

    Tightening torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

  5. Install the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")