Repair Procedures: Inspection
- Disconnect the battery (-) terminal.
- Remove the fuse box cover.
- Remove the starter relay (A).
- Check for continuity between the terminals (30 and 87) using an ohmmeter.
Terminal Resistance Measure 30 - 87 1MΩ or higher continuity between the terminals, replace the relay. - Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
Terminal Resistance Measure 30 - 87 1Ω or less continuity between the terminals, replace the relay.