LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2024 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> ESC Control Module >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in reverse order of removal.
  2. After installation, bleed the brake system. (Refer to Brake System - "BRAKE BLEEDING PROCEDURES ")
  3. Connect the diagnostic tool to the data link connector located underneath the dash panel.
  4. Conduct the Variant coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
  7. After replacing the ESC control module execute the "Assembly Check (ECU replacement)" of the additional function to check that the mounting is successful.
scientia non olet · About LEMON Manuals