Final DTC Checking

Information 

After repairing the problem using the DTC guide, it is essential to verify if the troubles have been corrected.

1. After connecting the GDS, perform self-diagnosis to check the "Fault code (DTC)".
2. Clear the stored fault code by using the diagnostic device.
3. The vehicle is driven according to the DTC detection condition of the failure determination condition.
4. Using GDS, see if the DTC returns.
5. Does the DTC recur?

   No fault code/OK 

   System is now working properly.

   Release the vehicle.

   Fault Code Regeneration/NG 

   Check the AWD coupling assembly for internal failures and replace if necessary.

   "After checking and replacing the AWD coupling assembly, Initializing clutch learning amount"  procedure.