Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the intercooler inlet pipe.
(Refer to Engine Mechanical System - "INTERCOOLER ")
Disconnect the EWGA connector (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the shaft link assembly (B) after removing the C-ring (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the EWGA after removing the bolts (A).
Tightening Torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA