LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Tucson Plug-In Hybrid SEL >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System (PHEV) >> Fuel Pressure Regulator >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the fuel pump.

    (Refer to Fuel Delivery System - " FUEL PUMP  ") 

  2. Disconnect the fuel sender connector (A).
    G16172662Courtesy of HYUNDAI MOTOR AMERICA
  3. Release the fixing hook (A) and then remove the fuel sender (B) in the arrow direction.
    G16172663Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fixing pin (A) and then disconnect the fuel feed tube (B).
    G16172664Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the fuel pump motor connector (A).
    G16172665Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the fixing hook (A) and then remove the head assembly (B).
    G16172666Courtesy of HYUNDAI MOTOR AMERICA
  7. Release the fixing hook (A) and then remove the reservoir cup (B).
    G16172667Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the fuel pump motor connector (A).
  9. Disconnect the ground cable (B).
    G16172668Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the fixing pin (A) and then disconnect the fuel pressure regulator (B).
    G16172669Courtesy of HYUNDAI MOTOR AMERICA
    G16172670Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals